How To Be Safe In Science

Planning 
Aim: I want to find out how to be safe in science.

Equipment : 
- Bucket 
- Detergent
- Water 
- Tube
- Gas
- Safety glasses 
- Lighter 

Method : 
1-  Get a bucket. 
2 - Put in a good squirt of detergent. 
3 - Fill half of the bucket with cold water. 
4 - Take your loose clothing of, pull yours sleeves up, If you got long hair tie it up. 
5 -  Connect a tube up to the gas tap and put the other end into the water. 
6 -  Turn on the gas and make some BUBBLES. 
7 - Put your safety glasses on. 
8 - Wet your hands and wrists up to your elbows 
9 - Get a scoop of  bubbles.
10- Hold the bubbles away from your face.
11 - Using a lighter, Light the bottom of the bubbles. 
12 -  Slowly open your hands. 

Doing    

I didn't do it but i got my friend on video. It make some sort of reaction and the fire went slowly. The fire started small and got bigger by the minute. It had smoke coming out of it after it had stopped. It smelt like burning gas and burning hair.,  and It looked yellow and orange. Here Is the video of my friend Lauren lighting her hands on fire.  

Explaining  

Why Did we tie our hair up ?

We tied our hair up so it did not catch on fire. If we had our hair out it would burn of and

would take 1 or 2 years to grow back on our head. 

why did we wet our hands ?

We wet our hand because when you mix water and fire together water will win. It made a layer of protection so we would not get scarred or burnt.

Why did we take our loose clothes of ?

If we did not take our loose clothing of it would burn all over us and we would be burned or scarred for life. 

Why were we scared ?

we had adrenalin rushing through our body. Now What Is Adrenalin ?